2013年1月23日星期三

E14 Candle LED Bulb



GP-E14A-4W
Light body: milky glass or clear glass cover,CNC aluminum body,Anodic oxidation surface
Light base: E14
Light source: High lumen 27 PCS SMD  5050 LEDS
Power: 4W
Diameter: 37mm
Voltage;100-240V,50~60Hz
LED Color: Cool White, Warm White , Daylight White
Viewing Angle: 180 degree
Working temperature: -20oC~40oC
Life span: over 50,000hours
Consumes 80% less energy comparing to halogen spotlights
Proprietary & unique heat sink design
Certifications: CE and RoHS
No heat, UV or infrared in the beam. No mercury
Application:
Suitable for commercial and decorate lighting, Especially for sentiment lighting in show window coffee house, gallery and so on. Direct replace traditional spotlighting.
Caution:
1) Please read the specification first to make sure the using condition is fit.
2) Please shut off the switch before connect the product, then turn on.
3) Don't touch the metal parts of the bulb, while power is on.
4) Indoor use only
http://www.siwis-elec.com/smd-led-bulb/397204.html

Cree LED Bulb 3W



GPC37A-3W adopts 1pcs Cree LED Bulb 3W from Cree XPE,170-180 lm per LED(daylight), 150-160lm per LED(warm white) . Its housing is CNC aluminium material with good heat conduction, and it becomes quite exquisite after Anodic oxidation surface treatment. Light transmittance can be over 93%. Life span is 50,000 hours ,As a replacement of traditional halogen lamp, it can match with halogen transformer without any problem. It can be widely used for indoor lighting, such as hotel,restaurant, home lighting,etc.
Constant current driver, CNC Aluminum body, milky or transparent glass case, Anodic oxidation surface, CE&ROHS Approved.
LED Light Source: 1pcs High Power CREE XPE LED
Power consumption: 3W
Body materials: CNC Aluminum, milky or transparent glass case, Anodic oxidation surface
LED Color: Cool White, Warm White or Daylight White
Viewing Angle: 233 degree
Working Voltage: AC85-265V, 50~60Hz
Size: Φ37×110mm
Light base: E11/E12/E14/B22/E26/E27
Working environment: -20~45oC
Light transmission rate up to 93%
CE&ROHS Approved
Application:
Corridor, Hallway, Bathroom, Storeroom, Hotel, Casino, Supermarket, Subway station, Office
Caution:
1) Please read the specification first to make sure the using condition is fit.
2) Please shut off the switch before connect the product, then turn on.
3) Don't touch the metal parts of the bulb, while power is on.
4) Indoor use only.

6W LED Down Light


GP-D61, These high output downlight fittings use high-tech, energy-saving and Environmentally friendly 6W LED Down Light to give a reliable light source the can last for 50,000 hours, this light source consumes less than 1/5 the energy of traditional downlights, making it a cost effective alternative. Constant current driver system.
LED Source: High Power LED 6*1W/6W
Dimension: 107*70mm
View Angle: 8-120 Degree. can adjust according to customers request
House Material:  aluminum , Anodic oxidation surface
Input Voltage: 85-245V/AC, 50-60Hz
Output Voltage:12VAC/DC
Reflector Efficiency: 90%
Color: Cool White, Natural White, Warm White
Safety Assurance: CE RoHS. IP Degree: IP60
Brightness Degradation: 7%~10%/3kh (Edison), 3%~6%/3kh (Cree)
Warranty(years): 3years



*Application: Home / office lighting, display case lighting under cabinet lighting Art lighting Boat lighting, accent lighting,exhibition halls, and other local decorative lighting projects.Replace traditional halogen ceilign lamp or downlight directly.
*Caution:
1) Please read the specification first to make sure the using condition is fit.
2) Please shut off the switch before connect the product, and then turn on.
3) Don't touch the metal parts of the bulb, while power is on.
4) Indoor use only.

2012年6月20日星期三

ilumenite


About us:
The Ilumenite production line and process controls all aspect of production to ensure the highest quality and reliability. Coupled with the vertical integration model Iluminite products undergo strict cost controls to maintain the quality standard while providing a competitive edge in price competitiveness. We invite you to visit our professional showrooms and global tradeshows to experience the Ilumenite difference.


Contact us:
Gonghe Town, He Shan City Guangdong,P.R. China 529728
P +86 750-8300-941
F +86 750-8300-940
Email: dla(at)neo-neon.com (America) dld(at)neo-neon.com (Europe.Asia)

Website:
http://www.ilumenite.com/

2012年3月7日星期三

How to Wire LED Lights

Wiring LED lights can be a bit tricky because of the accuracy demanded in circuit values and the number of LEDs in a typical lighting circuit. With LEDs, you need accurate values for current, voltage and resistance, or the circuit will not work at all. You also need to make a large number of clean connections using delicate parts (as opposed to incandescent and fluorescent lamps, which require fewer bulbs and use lamps that are easy to connect to the power supply). Fortunately, the calculations are pretty straightforward, and LEDs are tough enough to stand up to soldering with little risk of failure.
Instructions


        1

        Gather the LEDs that you want to wire into your circuit. Most LEDs require little power, so assuming you are using a decent power supply, you should be able to put in pretty much as many as you want.
        2

        Note the specs of your LEDs. Commercially available LED Tube  have two values you need to be concerned with: voltage and amperage. For the sake of simplicity, use LEDs that all have the same values.

       
        3

        Decide whether you want to wire your LEDs in series or parallel. In series circuits, the LEDs' voltages are added. So, for example, if you have three 2-volt LEDs, you'll have a total voltage drop of 6 volts. Since you need a power supply that is higher than the total combined voltage of the LEDs, wiring in parallel is almost always a good idea. If you're using only a few LEDs, however, you may want to wire in series for the sake of simplicity.
        4

        Go to an online LED circuit calculator and plug in your values to determine what resistor you need. Click on the tab that says "Parallel LEDs" and input the voltage of your power supply, the number of LEDs you're using, and the amperage and voltage of each LED. The calculator will tell you what resistor you need and the current rating that resistor requires.
        5

        Wire your resistor into the circuit. You can either use a resistor rated for the current of the total circuit and wire it to the positive terminal of your power supply or wire a resistor of the same value, but with a lower current rating, to the cathode (the terminal near the flattened edge) of each LED. For example, if the calculator tells you that your 30 LED circuit needs a 100-ohm resistor rated for 6 watts, you can get one 6-watt 100-ohm resistor, or 30 smaller, common 100-ohm resistors (usually rated for 1/8 watt).
        6

        Wire the cathodes of each LED Light Bulbs in parallel. Hook up each cathode to the common resistor. If each has its own resistor, wire each resistor to the positive terminal of the power supply.
        7

        Wire the anodes (the other terminal of the LEDs) to an SPST switch. Wire the other terminal of the switch to the negative terminal of the power supply. You now have an LED light circuit.

2011年11月17日星期四

ledneon-sign


About us:
Founded in  1994  in   Beijing,   Beijing   Nairui  Industry & Trade Co., Ltd manufactures designs and develops a wide range of LED tube light and  low-voltage  neon  products with  fixed  assets  exceeding  RMB  20, 000, 000 .  The  factory  covers  more  than  5, 000 square meters with over   two   hundred  employees .  The   annual   output capacity is more than 150, 000 units.

Contact us:
Address :  East of Chaobai River Bridge, Shunyi District, Beijing, China.101300
Worktime :  9:00-18:00 (Beijing time)
Business Phone :  86-10-69428741(Working time)
86-10-13041150127(Nonworking time)
Fax: 86-10-89476446

Website:
http://www.ledneon-sign.com/

ledsignsneon


About us:
Welcome to LEDSignsNeon.com--your online source for discount neon bar signs, LED business signs, programmable LED signs, and neon open signs for sale.  It is our goal to provide you with the latest product technology and innovation at the best prices on the market to ensure your greatest value.  We want you to know that our customers' satisfaction is our number one priority so you can shop confidently with us.  You will find a wide selection in each collection that we offer.  Bring illumination to any area you choose to display them in!

Contact us:
Email:support@ledsignsneon.com

Website:
http://www.ledsignsneon.com/